English-16
Initial Setup
When using the monitor for the rst time, follow the screen
instructions to perform the initial setup.
1. Start the initial setup
Press the [Start] button to start the initial setup.
2. Select a language
Select the language for the OSD menu.
You can select a language from the following 9 available
languages.
English / French / German / Spanish / Italian / Russian /
Swedish / Chinese / Japanese
3. Select a mode
Select the operation mode of the monitor.
Select the WCD mode to fully use the functions of the
monitor.
4. Set the time
Select whether to set the time automatically or manually.
To set the time automatically, connect the monitor to a
network using the LAN port and select a time zone.
To set the time manually, disable [Network Time].
Set the date and time after selecting the time zone.
5. Initialization complete
The Welcome screen is displayed when the initial setup is
complete.
To Next Page
Loading...
Need help?
General