English-31
English
Connecting interface
Connecting external device
There are two ways to connect an external device to the monitor.
• RS-232C terminal.
Connecting an external device to the RS-232C terminal of the monitor with an RS-232C cable.
• LAN port.
Connecting an external device to the LAN port of the monitor with a LAN cable.
For further information regarding the type of LAN cable to use, please consult your network administrator.
Control command
For other commands, please see “External_Control.pdf” le on the NEC website.
Function (Monitor ID = 1) Code Data
Power ON* 01 30 41 30 41 30 43 02 43 32 30 33 44 36 30 30 30 31 03 73 0d
Power OFF* 01 30 41 30 41 30 43 02 43 32 30 33 44 36 30 30 30 34 03 76 0d
Input Source Select HDMI input 01 30 41 30 45 30 41 02 30 30 36 30 30 30 31 31 03 72 0d
Input Source Select USB-C1 input 01 30 41 30 45 30 41 02 30 30 36 30 30 30 38 39 03 73 0d
Input Source Select USB-C2 input 01 30 41 30 45 30 41 02 30 30 36 30 30 30 38 41 03 0B 0d
Sound Mute ON 01 30 41 30 45 30 41 02 30 30 38 44 30 30 30 31 03 09 0d
Sound Mute OFF 01 30 41 30 45 30 41 02 30 30 38 44 30 30 30 32 03 0A 0d
* In LAN control, "Power ON" and "Power OFF" are not supported.
External Control
To Next Page
Loading...
Need help?
General