2
Introduction
DLP Cinema Projector Installation and Adjustment NEC Display Solutions, Ltd. Manual (This document) describes the procedures
to install, adjust and maintain the projector (NC1000C) and peripheral devices. For safe and correct installation, adjustment and use
of the projector, carefully read this document before installation.
Refer to the operation manuals of the applicable products for basic operation and remarks of the projector. This document expects
the readers who have basic knowledge about projector installation. After reading, please keep this document under care of the
company which installed or adjusted the projector.
The product name used in this manual
In this manual, the device name is written as listed below. If the function has difference by devices, the product name is written in
the text.
• NC1000C
Projector
• NP-90MS02 Media block or IMB
• Digital Cinema Communicator DCC
To Next Page
Loading...
Need help?
General
