NEC NC1000C - Projector Adjustment and Connecting - Input Ports

62
Projector Adjustment and Connecting
3-8. Connecting with the Image Input Port
By installing option board to projector, you can add input port. Input port which can add to option board is listed below. For the
connection diagram of projector and peripheral equipment, refer to Installation manual of option board.
Option Board Image Input Port
NP-90MS02 (Note) HDMI input port x1
SDI input port x2
(Note) The NP-90MS02 video input ports do not support CineLink 2. The NP-90MS02 video input ports cannot display the encrypted
contents.