48
3. Projector Adjustment and Connecting
3-1. Flow of Adjustment and Connecting
Adjustment and Connecting of the projector accord to the procedure below.
• Step1
Turning Your Projector On (See page 52)
• Step2
Setting The Date and Time in the Projector (See page 53)
• Step3
Setting the Projector Projection Method (See page 54)
• Step4
Adjusting the Lens (See page 56)
Display the test pattern to adjust the screen size, screen angle and focus.
• Step5
Replacing the notch filter (See page 59)
• Step6
Connecting with the Image Input Port (See page 62)
• Step7
Connecting the Various Control Terminal (See page 63)
This chapter explains the adjustment and connection of the projector with Steps 1 to 7.
Steps 1 to 7 complete the adjustment and connection of the projector. Next, carry out various settings such as color adjustment
using DCC. Refer to the “Digital Cinema Communicator Installation Manual” for the procedure.
To Next Page
Loading...
