NEC NC1000C - Setup Date

86
LCD Menu
4-5-8. Setup Date
Displays the date when the projector was setup (starting date of the warranty period).
The setup date is configured by using DCC. Refer to “Digital Cinema Communicator Installation Manual” for details.
← Displays the date when the projector was set up (starting date of the warranty period).
4-5-9. Option Status
Displays the link status of the device mounted in slot on the projector. The device name is displayed in ( ) when the projector is in
standby or when connection to the device cannot be confirmed.
← Displays the link status of the device in slot.
 •NP-90MS:NP-90MS02
 •<VendorName>IMB:Mediablock
 •NoBoard:Nodevicemounted