NEC NC1000C - Setting Up Your Projector - AC Power; AC Power Specifications and Breakers

34
Setting Up Your Projector
2-3-1. AC Power Work Specications
AC power supply equipment
Do not use any voltage other than those shown below for the AC power supply connected to the projector.
100–130V AC, single phase, power, 50/60Hz
200–240V AC, single phase, power, 50/60Hz
Breaker
Connect the AC power supply from the power supply equipment of the building to the projector via a breaker. The breaker capacity
will be as follows depending on the power supply voltage.
AC power supply voltage used Breaker current capacity
100–240V 20 A