77
LCD Menu
(If you selected Image Orient)
← Displays the currently selected item with asterisk (*).
← Displays the setting.
Normal-F Front projection. With the projector installed on the pedestal, projection is executed from the front of
the screen.
Normal-R Rear projection. With the projector installed on the pedestal, projection is executed from the back of
the screen.
UpsideDown-F Ceiling front projection. With the projector installed on the ceiling, projection is executed from the
front of the screen.
UpsideDown-R Ceiling rear projection. With the projector installed on the ceiling, projection is executed from the
back of the screen.
(If you selected Fan Tilt Setting)
← Displays the currently selected item with asterisk (*).
← Displays the setting.
Floor Select when the projector is installed on a desktop.
Ceiling Select when the projector is installed on the ceiling.
Lens Type
Sets the type of lens (supports or does not support the lens memory function) attached to the projector.
The lens memory function is supported by the following system firmware and lens firmware versions of the
projector.
• Version 2.000 or later of the system firmware of the projector
• Version MRN_D01 or later of the lens firmware
← Displays the currently selected item with asterisk (*).
← Displays the setting.
Without Sensor Selected when using a lens unit that does not support the lens memory function.
With Sensor Selected when using a lens unit that supports the lens memory function (default value).
To Next Page
Loading...
