49
4. Using Menus
SIB
Displays the model name and version information about the signal input board (SIB). When the projector is in standby mode,
the version information displays “---”.
← Displays the model name of the signal input board.
← Displays version information.
IMB
Displays the vendor name and version information about the media block (IMB). When the projector is in standby mode, the
vendor name is blank and the version information displays “---”.
← Displays the vendor name.
← Displays the version information.
Slave
Displays the slave firmware version of the projector.
← Displays the version information.
Ballast
Displays the ballast firmware version of the projector. The version information is displayed in the format “ballast 1/ballast 2”.
← Displays the version information.
4-6-6. IP Address
Displays the IP address set in the projector.
← Displays the IP address.
System Displays the IP address set for the projector (System).
To Next Page
Loading...
Need help?
General
