50
4. Using Menus
4-6-7. Setup Date
Displays the date when the projector was set up (starting date of the warranty period).
← Displays the date when the projector was set up (starting date of the warranty
period).
4-6-8. Option Status
Displays the link status of the device mounted in slot A (media block, signal input board) on the projector. The device name is
displayed in ( ) when the projector is in standby or when connection to the device cannot be confirmed.
← Slot B is not available in this projector.
← Displays the link status of the device in slot A.
B Not Available: Slot B is not available in this projector.
A
Displays the link status of the device in slot A.
<Vendor Name> IMB: Media block (NC-90MS01)
• NC-80LB: Signal input board (NC-80LB01-B)
• NC-80DS: Signal input board (NC-80DS01-B)
• No Board: No device mounted
To Next Page
Loading...
Need help?
General
