6. Using the VIEWER
100
11. Press the ▶ button to move the cursor to ,
then press the ENTER button.
The picture will rotate clockwise by 90°.
• Every time you press the ENTER button in
this state, the picture rotates 90° clockwise.
12. Press the ▶ button to move the cursor to ,
then press the ENTER button.
The control bar disappears.
13. Press the EXIT button.
The display changes to the le list screen.
• You can also move the cursor to with
the control bar of the step 10 and press the
ENTER button to change the le list screen.
• To return to the slide screen from the le
list screen, move the cursor to the picture
to be displayed in the slideshow and press
the ENTER button.
② Remove the USB memory
1. Press the MENU button in the le list screen.
A pop-up menu will be displayed at the bottom
left of the screen.
• Press the MENU button while the pop-up
menu is being displayed to display the
[INPUT] screen. When you press the MENU
button again, the [INPUT] screen disap-
pears.
• When you press the EXIT button while the
pop-up menu is being displayed, the pop-
up menu disappears.
2. Move the cursor to [REMOVE USB DEVICE]
and press the ENTER button.
A conrmation message will be displayed in the
center of the screen.
3. To remove the USB memory, press the ◀
button to move the cursor to [OK] and press
the ENTER button.
The message displayed in the center of the
screen changes.
4. Press the ENTER button.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
