4. Using On-Screen Menu
75
Enabling the deinterlace [DEINTERLACE]
Turns on or o the deinterlace function for a telecine signal.
OFF Select this option if there is any jitter or artifacts in video.
ON Default standard setting.
NOTE:
• This function is not available for HDTV (progressive) and computer signals.
Setting HDMI1, HDMI2, or HDBaseT [VIDEO LEVEL]
Make the settings for each video level when connecting HDMI equipment and Ethernet/HDBaseT
terminal.
Select [AUTO] to automatically detect video level. If automatic detection may not work well, select
[NORMAL] to disable the [ENHANCED] feature of your HDMI equipment or select [ENHANCED] to
improve image contrast and increase detail in the dark areas.
Setting Audio [AUDIO SELECT]
This selects the audio inputs of the HDMI 1 IN terminal, HDMI 2 IN terminal, LAN port and Ethernet/
HDBaseT port of the unit.
When inputting analog audio, connect the audio output terminal of the connected device to the
AUDIO IN terminal of the unit and set the audio input selection to [COMPUTER].
Enabling Key Sound and Error Sound [BEEP]
This feature turns on or o the button sound or alarm when an error occurs or the following opera-
tions are performed.
TIP:
• Volume control for [BEEP] is disabled. AV-MUTE button is not eective to stop beeping sound. If you want to activate BEEP function,
set [BEEP] to [OFF].
Selecting Control Port [LAN PORT]
Connect to a LAN cable and select the control port.
See the explanations for each port’s connection terminals. (→ page 9)
LAN Use the LAN port to control the unit.
HDBaseT Use the Ethernet/HDBase port to control the unit.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
