ROI-S04488 OPERATION
3-39
Step
Procedure
For 1+0 System
31 Press the “Enter” key, then, following Alarm table 2/2 appears,
Notes: 1. Alarm table displayed on the LCT depends on system
configuration.
2. Alarms signals C1 to C4 will appear on the ALM/AUX
ALM terminals.
C1: 1, 2 and 3 pins
C2: 4, 5 and 6 pins
C3: 7, 8 and 9 pins
C4: 10, 11 and 12 pins
13. Alarm table 1/2
1. INPUT LOSS
2. AIS RCVD
3. AIS SEND
4. OUTPUT LOSS
5. LAN INTFC ALM
6. WS INPUT LOSS
7. WS AIS RCVD
8. WS AIS SEND
9. WS OUTPUT LOSS
10. TX CLK LOSS
11. FSYNC ALM
12. HIGH BER ALM
13. LOW BER ALM
14. BER ALM
Form C1
OUT
OUT
OUT
Form C2
OUT
OUT
OUT
OUT
OUT
Form C3
OUT
OUT
Form C4
Press any key to continue…
13. Alarm table 2/2
15. MOD ALM
16. DEM ALM
17. OPR ALM
18. TX PWR ALM
19. RX LEV ALM
20. APC1 ALM
21. APC2 ALM
22. IF INPUT ALM
23. MAINT
Form C1
OUT
OUT
OUT
OUT
OUT
OUT
MASK
Form C2
OUT
OUT
OUT
OUT
OUT
MASK
Form C3
MASK
Form C4
OUT
Select item No. (1-23,0:no change):
To Next Page
Loading...
