18
2. Projecting an Image (Basic Operation)
2-4. Selecting a Source
Selecting the computer or video source
NOTE:
• Turn on the computer or video source equipment connected to the projector.
Using the Direct button on the remote control
Press the Direct button on the remote control.
Select the input according to the connection terminal.
Input connector Button on the remote
control
Note
HDMI 1 IN/HDMI 2 IN HDMI Switches between [HDMI 1] and [HDMI 2] each time it is pressed.
DisplayPort/DVI-D IN DisplayPort Switches between [DisplayPort] and [DVI-D] each time it is pressed.
3G/HD/SD-SDI IN AUX
HDBaseT/LAN NETWORK
COMPUTER 1 IN COMPUTER 1
BNC IN COMPUTER 2
To Next Page
Loading...
Need help?
General
