35
3. Convenient Features
3-10. Storing Changes for Lens Shift [LENS MEMORY]
Stores the projection position (lens shift) on the screen in the projector’s memory. A maximum of 10 values can be
stored. When you recall the stored [LENS MEMORY], the lens shift will automatically move at the adjustment value
to move the position of the projection screen.
To store your adjusted values in [LENS MEMORY]:
1. Adjust the projection position using the lens shift function of the projector.
2. Press the MENU button.
The menu will be displayed.
3. Press the ◀/▶ button to select [DISPLAY].
4. Press the ▼/▲ button to select [LENS MEMORY] and press the ENTER or ▶ button.
The [LENS MEMORY] screen will be displayed.
5. Press the ▼/▲ button to move the cursor to any of the items displayed as [STORE] on the right side in
[MEMORY 1] to [MEMORY 10], then press the ENTER or ▶ button.
The lens shift adjustment value will be stored in the memory.
To call up your adjusted values from [LENS MEMORY]:
1. Press the MENU button.
The menu will be displayed.
2. Press the ◀/▶ button to select [DISPLAY].
3. Press the ▼/▲ button to select [LENS MEMORY] and press the ENTER or ▶ button.
The [LENS MEMORY] screen will be displayed.
4. Press the ▼/▲ button to move the cursor to any of the items displayed as [LOAD] on the right side in [MEMORY
1] to [MEMORY 10], then press the ENTER button.
The lens shift adjustment value will be recalled from [LENS MEMORY] and the lens shift will be automatically
activated to move the position of the projection screen.
To delete your adjusted values from [LENS MEMORY]:
1. Press the MENU button.
The menu will be displayed.
2. Press the ◀/▶ button to select [DISPLAY].
3. Press the ▼/▲ button to select [LENS MEMORY] and press the ENTER or ▶ button.
The [LENS MEMORY] screen will be displayed.
4. Press the ▼/▲ button to move the cursor to any of the items displayed as [LOAD] on the right side in [MEMORY
1] to [MEMORY 10], then press the ▶ button.
The display changes from [LOAD] to [RESET].
• The setting switches between [RESET] and [LOAD] each time the ▶ button is pressed.
5. Press the ENTER button.
The adjustment value in the memory will be deleted.
To Next Page
Loading...
Need help?
General
