19
2. Projecting an Image (Basic Operation)
Using the INPUT button on the projector cabinet
Press the INPUT button for 1 second or longer. The projector will search
for the available input source and display it. The input source will change
as follows:
HDMI 1 → HDMI 2 → COMPUTER → BNC → DVI-D → DisplayPort →
SDI → HDBaseT……
Select by displaying the On-Screen Menu
1. Press the MENU button.
The On-Screen Menu will be displayed on.
2. Move the cursor by the ◀ or ▶ button to the [INPUT].
3. Move the cursor by the ▼ or ▲ button to the [INPUT SELECTION]
and then press the ENTER or ▶ button.
4. Press the ▼ or ▲ button, select the input source, and press the
ENTER or ▶ button.
To Next Page
Loading...
Need help?
General
