60
4. Using On-Screen Menu
4-5-7. BLANKING
Adjusts the display range (BLANKING) of the top, bottom, left, and right edges of the video signal.
4-5-8. EDGE BLENDING
Adjust the edges (boundaries) of the projection screen when projecting high-resolution images by combining multiple
projectors on the left, right, top and bottom.
MODE Enables/disables the edge blending function.
MARKER Set whether to display the markers when adjusting the range and display position.
When this is turned on, when the white level is increased from [0], a green marker is displayed
for range adjustment and a red marker is displayed for display position adjustment.
RANGE Adjusts the edge blending range (width).
BLACK LEVEL Adjusts the black level of non-overlapping images on the multiple screens.
RESET Returns the edge blending adjustment value to the factory setting.
Example of a screen that is projected by arranging the images of 4 projectors with 2 units each vertically and horizontally.
Edge Blending area
Projected area
Projected area
Projected area
Projected area
4-5-9. SCREEN TYPE
Set the ratio of the screen to project.
Select from 16:10, 16:9 or 4:3.
To Next Page
Loading...
Need help?
General
