To Next Page

To Previous Page

4. Using On-Screen Menu

ROTATION

Rotates the screen within the display area.

As the angle of rotation increases, the screen becomes smaller.

ROTATION

-100 (-25°) 0 100 (25°)

RESET Returns the rotation adjustment value to the factory setting.

PINCUSHION / BARREL

Adjust this when projecting onto a cylindrical screen or spherical surface.

H PINCUSHION / BARREL

-150 (-30%) 0 300 (60%)

V PINCUSHION / BARREL

-150 (-30%) 0 300 (60%)

H KEYSTONE Example of keystone adjustment in the horizontal direction:

V KEYSTONE Example keystone adjustment in the vertical direction:

ROTATION Rotation example:

RESET Returns the adjustment value of [PINCUSHION / BARREL] to the factory setting.

NOTE:

• [H KEYSTONE] or [V KEYSTONE] can be used when adjusting [H PINCUSHION / BARREL] or [V PINCUSHION / BARREL].

• [ROTATION] can be used when adjusting [H KEYSTONE] or [V KEYSTONE].

• Since the screen rotates within the display area, the screen becomes smaller as the rotation angle increases.

NEC PX2000UL User Manual

Other manuals for NEC PX2000UL