NEC Univerge SV 9500 - Page 79

70
• TO DOWNLOAD A FILE
The DT830 Series user can download files for Music on
Hold, Ringer Tone and Directory. When downloading
these files, the terminal needs to be connected FTP/
TFTP server.
Before starting the download, the IP Address of the
FTP/TFTP Server must be entered from the terminal.
STEP 1: Set up the FTP/TFTP server.
<FTP server>
Put the downloading file into the designated
directory (for Windows IIS, the default is
“C:\InetPub\ftproot”) of the FTP server.
<TFTP server>
Put the downloading file into a desired direc-
tory of TFTP server and then specify it as the
directory for downloading.
STEP 2: Display the Menu screen, and select Setting.
STEP 3: Select Download.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press , or the OK soft key.
• Press key.
STEP 4: Select Protocol.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press , or the OK soft key.
• Press key.
Note:
For details on the FTP/TFTP service, contact the
System administrator.
2
2
1
2
Data Backup/Restore
[Setting]
3
OKMenu

User Setting
Download

3
3
1
2
[Download Menu]
3
4
FTP Settings
OKBack

Download Files
Download Address

Protocol