NEC Univerge SV 9500 - Page 80

71
STEP 5: Select a protocol used by the server which
stores the download file.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press or the OK soft key.
• Press or key, and then press or the OK
soft key.
STEP 6: The display goes back to the Download
Menu screen.
When FTP is selected here, go to STEP
7.
When TFTP is selected here, go to STEP
15.
STEP 7: Select FTP Settings.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press , or the OK soft key.
• Press key.
STEP 8: Select User ID.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press , or the OK soft key.
• Press key.
STEP 9: Enter a User ID by using digit keys, then
press or the OK soft key.
1
2
1
2
[Protocol]
OK
Back
TFTP

FTP
1
2
4
4
1
2
[Download Menu]
3
4
OKBack
Download Files
Download Address

Protocol
FTP Settings
1
1
1
2
[FTP Settings]
3
OKBack

Password
Folder
User ID
[User ID]
OKBack
BK
A
Input a user ID.