NEC Univerge SV8100 - Page 1009

UNIVERGE SV8100 Issue 5.0
Traffic Reports 1 - 999
Related Features
Station Message Detail Recording
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
90-20-01 Traffic Report Data Setup – Call
Traffic Output
Determine whether or not the Call
Traffic Output should be
measured.
0 = Not Measured
1 = Measure
(default = 0)
90-20-03 Traffic Report Data Setup – All
Line Busy Output
All Line Busy Output. 0 = Not Detected
1~256
(Report when the data
reaches the defined
value)
(default = 0)
90-20-04 Traffic Report Data Setup –
DTMF Receiver Busy Output
Use to define the DTMF receiver
busy output details of the traffic
report.
0 = Not Detected
1~256
(Report when the data
reaches the defined
value)
(default = 0)
90-20-05 Traffic Report Data Setup – Dial
Tone Detector Busy Output
Use to define the dial tone
detector busy output details of the
traffic report.
0 = Not Detected
1~256
(Report when the data
reaches the defined
value)
(default = 0)
90-20-06 Traffic Report Data Setup –
Caller ID Receiver Busy Output
Use to define the caller ID receiver
busy output details of the traffic
report.
0 = Not Detected
1~256
(Report when the data
reaches the defined
value)
(default = 0)
90-20-07 Traffic Report Data Setup –
Voice Mail Channel All Busy
Output
Use to define the voice mail
channel all busy output details of
the traffic report.
0 = Not Detected
1~256
(Report when the data
reaches the defined
value)
(default = 0)