UNIVERGE SV8100 Issue 5.0
Memo Dial 1 - 669
Memo Dial
Description
While on an outside call, Memo Dial lets a multiline terminal user store an important number for easy
redialing later on. The telephone can be like a notepad. For example, a user could dial Directory
Assistance and ask for a client’s telephone number. When Directory Assistance plays back the
requested number, the caller can use Memo Dial to jot the number down in the telephone memory. They
can quickly call the Memo Dial number after hanging up.
When a user enters a Memo Dial number, the dialed digits do not output over the trunk. Dialing Memo
Dial digits does not interfere with a call in progress.
Conditions
When Memo Dial calls out, it outdials the entire stored number. Memo Dial does not
automatically strip out trunk or PBX access codes if entered as part of the stored number.
Only one number can be stored at a time.
If a number is already stored in Memo Dial and you are on an internal or external call and
the Dial Memo Key is pressed, the number is erased.
A user’s outgoing dialing options affect how a Memo Dial call is placed.
Memo Dial is not available at single line telephones.
Default Setting
Disabled
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
To Next Page
Loading...
