NEC Univerge SV8100 - Drop Key

UNIVERGE SV8100 Issue 5.0
Drop Key 1 - 467
Drop Key
Description
The Drop Key abandons a call while retaining the PBX/Centrex line to originate another call. The Drop
Key is provided by programming a Programmable Function Key. This feature allows Recall to be used to
provide a hookflash to the PBX or Central Office. A single line telephone user can use the Drop Key
function by an access code.
Conditions
 The Drop key provides a timed disconnect signal on CO/PBX lines.
 The Drop key cannot be used for internal, DID, or Tie line calls.
Default Setting
None
System Availability
Terminals
All Stations
Required Component(s)
None
Related Features
Flash
PBX Compatibility