NEC Univerge SV8100 - DT700 Large LED Indication

UNIVERGE SV8100 Issue 5.0
DT700 Large LED Indication 1 - 471
DT700 Large LED Indication
Description
From V3.0 software or higher the DT700 large LED indication allows for different colours to be
displayed on the large LED for different incoming call scenarios presented to the DT700 handset.
Conditions
 The colours allowed are red, green, blue, yellow, purple, sky blue, white and a rotation of
all.
 The selectable LED indication is on a per phone basis for intercom calls
 The selectable LED indication is on a per trunk basis for CO calls.
 The electable LED indication is on a per virtual extension port basis for virtual extension
calls.
 In DT700 local terminal setting menu, illumination setting must be ‘Automatic’.
Default Setting
All red.
The LED will always illuminate red for Message Waiting.
System Availability
Terminals
All DT700 Series with F/W version 1.3.0.0 with exception of economy.
Softphone does not support this feature.
Required Component(s)
None