NEC Univerge SV8100 - SLT Adapter

UNIVERGE SV8100 Issue 5.0
SLT Adapter 1 - 887
SLT Adapter
Description
The SLT (Single Line Telephone) Adapter allows a port of an CD-8DLCA, PZ-8DLCB, CD-16DLCA or
CD-LTA to support a single line telephone. A single line telephone can be connected to the DLC port
using the SLT Adapter and 2-wire cable. Eight SLTII(1)-U( ) ADP Single Line Telephone Adapters can
be installed in the UNIVERGE SV8100 system.
Conditions
 A maximum of 368 SLTII(1)-U( ) ADPs can be used in the UNIVERGE SV8100 system.
 Dial Pulse and Dual-Tone Multifrequency Single Line Telephones are supported.
 The SLTII(1)-U( ) ADP does not support voice mail.
 Message Waiting LED is not supported.
 A single line telephone connected to an SLTII(1)-U( ) ADP cannot perform a Trunk-to-Trunk
Transfer or support a 1-terminal to 2-outside party conference call.
Default Setting
None
System Availability
Terminals
Single Line Telephones
Required Component(s)
SLTII(1)-U( ) ADP
Related Features
Ancillary Device Connection