NEC Univerge SV8100 - Voice Mail Message Indication on Line Keys

UNIVERGE SV8100 Issue 5.0
Voice Mail Message Indication on Line Keys 1 - 1105
Voice Mail Message Indication on Line Keys
Description
Voice Mail Message Indication on Line Keys indicates a new voice mail message on Line Keys or DSS/
BLF keys.
Conditions
 When a DSS key of an installed extension is pressed when flashing it calls that extension.
 You have to use a VM Message key (code 77) to get the indication when there is a new
message. It can also be used for installed extensions.
 VM Message key calls the VM and logs into the mail box.
 If an VM Message key for extension A is placed on extension A, the Large LED does not
light on extension A for new message indication. Instead the VM Message key flashes
green.
 VM message LED is a higher priority then any other status for the DSS/BLF key.
 The enabling or disabling of Voice Mail Indication on BLF enables the station with the
message to show up on other telephones. It does not enable/disable stations from seeing
the BLF indication.
 Virtual Extension Keys assigned as code *03 do not support Voice Mail Message Indication
on Line Keys.
Default Setting
Not allowed
System Availability
Terminals
All Multiline Terminals
Required Component(s)
VM (Digital or Analog)