NEC Univerge SV8100 - Table 1-13 Restrictions for Calling Party Names

UNIVERGE SV8100 Issue 5.0
ISDN Compatibility 1 - 613
The UNIVERGE SV8100 supports receiving the name from the Network in supported
formats only and cannot send the Calling Name. Refer to Table 1-13 Restrictions for
Calling Party Names.
 CO Line Service is not supported.
ISDN – PRI cannot be configured for CO Emulation
 B-Channel to Trunk Association
When an Incoming ISDN-BRI/PRI call is received, the system assigns the lowest trunk
number of the ISDN circuit to the incoming call associated with the B-Channel. When an
Outgoing call is placed using the ISDN-PRI/BRI, the system assigns the Trunk and
B-Channel association according to the chart below. This is based on the Trunk-to-Trunk
Group and Trunk Group Priority assignment in (Program 14-05-01).
Table 1-13 Restrictions for Calling Party Names
Protocols Name Delivery Formats
NI-2 Facility Information Elements
4ESS (AT&T Custom) Not Supported
AT&T5ESS Lucent Custom Facility Information Element
DMS-100 (Custom) * Display Information Element *
DMS-100 (National; ISDN) ** Facility Information Element **
*
Nortel Specification NIX-A211-1
** Nortel Specification NIS-A233-1