Issue 5.0 UNIVERGE SV8100
1 - 28 Alarm Reports
Printing Reports:
Printing System Information Reports:
Program
Number
Program Name Description/Comments Assigned Data
90-12-01 System Alarm Output – Output
Port Type
Indicate the type of connection
used for the System Alarms. The
baud rate for the COM port should
be set in Program 10-21-02.
0 = No Setting
1~3 = Reserved
5 = USB Memory
(default = 0)
Program
Number
Program Name Description/Comments Assigned Data
90-13-01 System Information Output –
Output Port Type
Indicate the type of connection
system information.
0 = No Setting
5 = USB
(default = 0)
90-13-02 System Information Output –
Destination Extension Number
If the output port type (Program
90-13-01) is set to CTA, enter the
extension number with the CTA
connection.
Extension Number (up
to eight digits)
(default not assigned)
To Next Page
Loading...
