NEC Univerge SV8100 - Synchronous Ringing

UNIVERGE SV8100 Issue 5.0
Synchronous Ringing 1 - 963
Synchronous Ringing
Description
Synchronous Ringing synchronizes CO/PBX incoming ringing with the incoming ringing pattern from a
Central Office.
Conditions
 When the multiline terminal is ringing at Secondary Extension (SE)/Virtual Extension (VE)
key, Synchronous Ring works.
 Synchronous Ringing is not supported for Tie/DID incoming calls, Off-Hook Ringing, or CO/
PBX Ring Transfers.
 If Synchronous Ringing is enabled, the VRS Preamble Message cannot be used.
Default Setting
Enabled
System Availability
Terminals
All Stations except single line telephones connected to AP(R)-R or APR-U Unit
Required Component(s)
None
Related Features
None