NEC Univerge SV8100 - Page 1048

Issue 5.0 UNIVERGE SV8100
1 - 1038 Unicast/Multicast Paging Mode
Related Features
IP Multiline Station (SIP)
Meet Me Paging
Meet Me Paging Transfer
Paging, External
Paging, Internal
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
10-19-01 VoIP DSP Resource Selection Select type of VoIP ETU DSP
Resource. This program setting
has no affect on the terminal/trunk
port assignment or usage.
0 = Common use for
both IP extensions and
trunks
1 = IP Extension
2 = SIP Trunk
3 = CCIS
4 = Use for NetLink
5 = Blocked
Default:
Resource 1 = 1
Resource 2~128 = 0
10-46-11 DT700 Server Information Setup
– Multicast IP Address
Set the Multicast IP address so
that two or more main devices
don’t overlap on the same
network, or if Multicast is used by
other IP services.
224.0.0.0~
239.255.255.255
(default = 224.0.0.10)
10-46-12 DT700 Server Information Setup
– Multicast Port
Sets the starting port number used
by Multicast.
0~65535
(default = 30000)
11-12-19 Service Code Setup (for Service
Access) – Internal Group Paging
Service code setup. MLT, SLT
(default = 801)
15-05-38 IP Telephone Terminal Basic
Data Setup – Paging Protocol
Mode
Sets the protocol mode for the
Paging function.
0 = Multicast
1 = Unicast
2 = Auto
(default = 0)