Issue 5.0 UNIVERGE SV8100
1 - 1040 Unicast/Multicast Paging Mode
Operation
To make an Internal Page announcement:
Multiline Terminal/IP Terminal/MH240
1. Press the zone Internal Paging key (Program 15-07 or SC 751: 21 + 0 or 1~9 or 01~64 for zones
(0 or 00 for All Call).
- OR -
Press Speaker or lift the handset.
Dial 801 and the Paging Zone number (0~9 or 00~64).
. Dialing 0 or 00 calls All Call Internal Paging.
- OR -
Dial 751 and the Combined Paging Group code 1~8 or 0 (for Internal/External All Call).
. Display indicates the Combined Paging as an External Page.
. If the Internal Page Zone is busy or if there are no extensions in a page group, the page is announced as an
External Page only.
2. Make announcement.
3. Press Speaker to hang up.
Single Line Telephone/SIP DECT Wireless
1. Lift the handset.
2. Dial 801 and the Paging Zone number (0~9 or 00~64).
. Dialing 0 or 00 calls All Call Internal Paging.
. Dial 751 and the Combined Paging Group code 1~8 or 0 (for Internal/External All Call).
3. Make announcement.
4. Hang up.
31-07-01 Combined Paging Assignments For each External Paging Group
(1~8 and 0 for All Call), assign a
corresponding Internal Zone for
Combined Paging.
Internal Page Zones: 0,
1~9, 00, 01~64
0~64
(0 = All internal
paging)
(default = 1)
Program
Number
Program Name Description/Comments Assigned Data
To Next Page
Loading...
