NEC Univerge SV8100 - Page 1060

Issue 5.0 UNIVERGE SV8100
1 - 1050 Uniform Call Distribution (UCD)
Operation
To call a UCD Group:
1. At the multiline terminal, press the Speaker key.
- OR -
At single line telephone, lift the handset.
2. Dial the UCD group (department) extension or pilot number.
. The system routes the call to the first free telephone in the (UCD group) department.
To log out of your UCD (Department Calling) Group:
.
While you are logged out, UCD (Department Calling) cannot route calls to your extension.
1. Press the Speaker key.
2. Dial 750 and 1.
- OR -
Press Uniform Call Distribution Log In key (Program 15-07 or SC 851: 46).
. The key lights while you are logged out.
To log back in to your UCD (Department Calling) Group:
.
While you log back in, Uniform Call Distribution routes calls to your extension.
1. Press the Speaker key.
2. Dial 750
and 0.
- OR -
Press UCD (Department Calling) Log In key (Program 15-07 or SC 851: 46).
. The key goes out when you log back in.