Issue 5.0 UNIVERGE SV8100
1 - 98 Automatic Route Selection
Program 26-01-03 for ARS Misdialed Number Handling as: 1 (Warning Tone)
With Program 26-01-06: ARS COS Match Access disabled (set to 0):
If at 9:00 AM, each extension dialed 9+(203)926-5400
All Extension would use Trunk Group 3
If at 9:00 AM, each extension dialed 9+(214)262-2000
All Extension would use Trunk Group 1
If at 6:00 PM, each extension dialed 9+(203)926-5400
All Extension would use Trunk Group 3
If at 6:00 PM, each extension dialed 9+(214)262-2000
Extension 301, 302 and 401 would use Trunk Group 1
Extension 402 would not be able to dial out as the COS is lower
With Program 26-01-06: ARS COS Match Access enabled (set to 1):
If at 9:00 AM, each extension dialed 9+(203)926-5400
Extension 301 would use Trunk Group 1
Extension 302 would use Trunk Group 2
Extension 401, 402 would use Trunk Group 3
If at 9:00 AM, each extension dialed 9+(214)262-2000
Extension 301 would use Trunk Group 1
Extension 302 would use Trunk Group 2
Extension 401, 402 would use Trunk Group 3
If at 6:00 PM, each extension dialed 9+(203)926-5400
Extension 301 would use Trunk Group 1
Extension 302 would use Trunk Group 2
Extension 401, 402 would use Trunk Group 3
If at 6:00 PM, each extension dialed 9+(214)262-2000
Extension 301, 302 would use Trunk Group 1
Extension 401 would use Trunk Group 3
Extension 402 would not be able to dial out as the COS does not match
Conditions
z Do not use ARS behind a Centrex/PBX.
z Line keys, Call Appearance (CAP) Keys, outgoing trunk group keys, dialing 804 + trunk
group, dialing +trunk number, and speed dial numbers assigned to a certain trunk group
can all be used to by-pass ARS.
z If no PBX access code is entered in the Dial Treatment, the system can still dial 911.
z Toll Restriction overrides ARS.
z A system with Automatic Route Selection cannot also have Trunk Group Routing.
To Next Page
Loading...
