Issue 5.0 UNIVERGE SV8100
1 - 1072 Universal Slots
Guide to Feature Programming
Operation
None
Program
Number
Program Name Description/Comments Assigned Data
10-03-01 ETU Setup Use Program 10-03-XX to setup
and confirm the basic
configuration data for each blade.
This program represents different
data depending on the blade
installed in the slot. Please refer
the SV8100 Programming Manual
for a more detailed description of
this program.
The assigned data
varies depending on
the blade installed in
the slot. Please refer
to the SV8100
Programming Manual
for a more detailed
description of the
10-03-XX programs.
90-34-01 Firmware Information – Pkg
Name
Use to list the package type and
firmware for the packages
installed.
The data varies
depending on the card
in the slot.
90-34-02 Firmware Information –
Firmware Version Number
Used to view the package name
and firmware for each blade.
The data varies
depending on the card
in the slot.
To Next Page
Loading...
