NEC Univerge SV8100 - Page 1145

UNIVERGE SV8100 Issue 5.0
Voice Response System (VRS) 1 - 1135
40-10-05 Voice Announcement Service
Option – Park and Page Repeat
Timer (VRS Msg Resend)
If a Park and Page is not picked up
during this time, the Paging
announcement repeats.
0~64800 seconds
(default = 0)
40-10-06 Voice Announcement Service
Option – Set VRS Message for
Private Call Refuse (VRS Msg
Private Call)
This item assigns the VRS
Message number to be used as
Private Call Refuse. When Fixed
message is set, VRS message
guidance is: Service finished.
Disconnect the line, please.
0~101
(0 = No message)
(101 = Fixed message)
(default = 0)
40-10-07 Voice Announcement Service
Option – Set VRS Message for
Caller ID Refuse (VRS Msg CID)
This item assigns the VRS
Message number to be used as
Caller ID Refuse. When Fixed
Message is set, VRS message
guidance is: Service finished.
Disconnect the line, please.
0~101
(0 = No message)
(101 = Fixed message)
(default = 0)
40-11-01 Preamble Message Assignment For each trunk that should have
the 900 Preamble option, enter the
number of the VRS message
(1~100) that is your recorded
preamble message. Enter 0 for no
preamble.
0~100
(0 = No Service)
(default = 0)
47-03-02 VM8000 InMail Group Mailbox
Options – Master Mailbox
Number
The Master Mailbox Number is the
same as the Department Group
master (pilot) number. Use this
option to select the Department
Group master (pilot) number
associated with the Master
Mailbox you are programming.
Digits (7 maximum, using 0~9).
Digits (eight maximum,
using 0~9)
No Setting
(entered by pressing
Hold)
(default not assigned)
Program
Number
Program Name Description/Comments Assigned Data