NEC Univerge SV8100 - Page 1161

UNIVERGE SV8100 Issue 5.0
Voice Response System (VRS) – Call Forward – Park and Page 1 - 1151
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
11-11-58 Service Code Setup (for Setup/
Entry Operation) – Call Forward
with Personal Greeting
Call forward with Personal
greeting VRS. Service code
setup.
MLT, SLT
(default = 795)
11-12-19 Service Code Setup (for Service
Access) – Internal Group Paging
Service code setup. MLT, SLT
(default = 801)
11-12-20 Service Code Setup (for Service
Access) – External Paging
External paging access code.
Service code setup.
MLT, SLT
(default = 803)
11-12-24 Service Code Setup (for Service
Access) – Combined Paging
Combined paging, internal/
external access code. Service
code setup.
MLT, SLT
(default = 751)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
31-02-01 Internal Paging Group
Assignment – Internal Paging
Group Number
Assign extensions to Internal
Paging Groups (i.e., Page Zones).
The system allows up to 64
Internal Paging Groups. An
extension can be in only one
Internal Paging Group.
0~64
(0 = No Setting)
Default:
0 for IP Station
1 for TDM Station
31-03-01 Internal Paging Group Settings –
Internal Paging Group Name
Assign name to Internal Paging
Groups (i.e., Page Zones). The
system shows the name you
program on the telephone
displays.
Up to 12 Characters
01 = Group 1
02 = Group 2
: :
64 = Group 64