Issue 5.0 UNIVERGE SV8100
1 - 1156 Volume Controls
Required Component(s)
None
Related Features
Off-Hook Signaling
Guide to Feature Programming
Operation
To adjust the volume of incoming ringing and splash tone:
1. If the telephone is idle, press Speaker and dial 829. If the telephone is ringing, skip to Step 2.
2. Press VOLUME up or VOLUME down.
To adjust the volume of ringing incoming Paging announcements, Handsfree, the handset or
Background Music:
1. Press VOLUME up or VOLUME down.
. The feature must be active to change the volume. Pressing the volume keys when the telephone is idle adjusts the
display contrast.
Program
Number
Program Name Description/Comments Assigned Data
15-02-27 Multiline Telephone Basic Data
Setup – Handset Volume
This option determines whether a
multiline terminal handset volume
changes back to the system
default (0) or whether it is retained
at the user’s setting (1) after
hanging up the handset. This
command also controls LCD
Contrast, Off-Hook Ringing
Volume, Station Ringing Volume
and Speaker Volume.
0 = Back to Default
(Back)
1 = Stay at previous
level (Stay)
(default = 1)
To Next Page
Loading...
