NEC Univerge SV8100 - Page 190

Issue 5.0 UNIVERGE SV8100
1 - 180 Call Forwarding/Do Not Disturb Override
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
11-12-01 Service Code Setup (for Service
Access) – Bypass Call
Customize the Service Code
which is to be used for Call
Forwarding/DND Override.
MLT, SLT
(default = 807)
11-16-06 Single Digit Service Code Setup
– DND/Call Forward Override
Bypass
Customize the 1-digit Service
Code used for DND/Call Forward
Override.
(default not assigned)
15-07-01 Programmable Function Keys Use to assign functions to multiline
terminal line keys.
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
20-13-04 Class of Service Options
(Supplementary Service) – Call
Forward/DND Override (Bypass
Call)
Turn On or Off the ability to use
Call Forwarding/DND Override.
0 = Off
1 = On
(default = 1 for
COS 1~15)