NEC Univerge SV8100 - Page 204

Issue 5.0 UNIVERGE SV8100
1 - 194 Call Waiting/Camp-On
Related Features
Callback
Off-Hook Signaling
Programmable Function Keys
Transfer
Trunk Queuing/Camp On
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
11-11-23 Service Code Setup (for Setup/
Entry Operation) – Second Call
for DID/DISA/DIL
This service code enables Second
Call to each extension when
Program 20-09-01 (Second Call)
is set to 0 (disable).
MLT
(default = 779)
11-12-04 Service Code Setup (for Service
Access) – Set Camp-On
Customize the Service Code,
which is to be used for setting
Camp-On.
MLT, SLT
(default = 850)
11-12-05 Service Code Setup (for Service
Access) – Cancel Camp-On
Customize the Service Code,
which is to be used for cancelling
Camp-On.
MLT, SLT
(default = 870)
11-12-47 Service Code Setup (for Service
Access) – Call Waiting Answer/
Split Answer
If required, use this program to
change the code users dial to Split
while on a call.
SLT
(default = 894)
11-16-05 Single Digit Service Code Setup
– Camp-On
Customize the 1-digit Service
Code used for setting Camp-On.
(default = N/A)
15-02-06 Multiline Telephone Basic Data
Setup – Hold Key Operating
Mode
Use this option to set the function
of the Multiline Hold key. Hold can
activate normal Hold or Exclusive
Hold.
0 = Normal (Common)
1 = Exclusive Hold
(default = 0)