NEC Univerge SV8100 - Page 207

UNIVERGE SV8100 Issue 5.0
Call Waiting/Camp-On 1 - 197
Operation
To Camp-On a busy extension:
1. Call the busy extension.
2. Dial 850 or press the Camp-On key (Program 15-07 or SC 851: 35).
3. Do not hang up.
. To camp-on to a trunk, refer to Trunk Queuing/Camp-On on page 1-1029.
To cancel a Camp-On request:
1. Hang up.
2. At a multiline terminal, press Speaker and dial 870.
- OR -
At a multiline terminal, press the Camp-On key (Program 15-07 or SC 851: 35).
- OR -
At the single line telephone, lift the handset and dial 870.
To Split (answer a waiting call) at a single line telephone:
.
Listen for Call Waiting Tones.
1. Hookflash and dial 894 to repeatedly split between the two calls.
. The operation depends on the setting in Program 20-03-01.
. This operation is valid only before the caller performs the camp-on operation (refer To Camp-0n a busy
extension – step 2).