Issue 5.0 UNIVERGE SV8100
1 - 18 Alarm
Guide to Feature Programming
Operation
To set the alarm:
1. At the multiline terminal, press Speaker.
- OR -
At the single line telephone, lift the handset.
2. Dial 827.
3. Dial alarm type (1 or 2).
. Alarm 1 sounds only once. Alarm 2 sounds each day at the preset time.
4. Dial the alarm time (24-hour clock).
. For example, for 1:15 PM dial 1315.
A confirmation tone is heard if the alarm has been set. If the alarm was not set, an error tone is heard instead.
5. At the multiline terminal, press Speaker to hang up.
- OR -
At the single line telephone, hang up.
Program
Number
Program Name Description/Comments Assigned Data
20-01-06 System Options – Alarm
Duration
Set the duration of the Alarm
signal.
0~64800 seconds
(default = 30 seconds)
To Next Page
Loading...
