Issue 5.0 UNIVERGE SV8100
1 - 314 Conference
When set for Conference, with an active call, the user presses Conf, places a second call,
then presses Conf twice. All the calls are then connected.
Users can Barge-In on a Conference call if allowed in programming.
Define the outgoing call options for each trunk and user.
Set up a Conference with a co-worker in your immediate work area.
DISA and Tie Line users may use the Barge-In feature on a Conference call if they know
the service code and are permitted in their DISA/Tie Line Class of Service.
Meet Me Conference lets an extension user set up a Conference via Paging.
Meet Me Paging lets an extension user set up a two-party meeting via Paging.
A user can set up an Unsupervised Trunk-to-Trunk Conference and then drop out of the
call, allowing the remaining parties to continue the conversation. Establish two trunk calls
press the Hold key and dial
#8.
You can optionally program Conf (Transfer) for Transfer. In this case, the Multiline Terminal
must have a Conference function key. The system also allows a call to be transferred into a
Conference call.
When the Conference Originator hangs up with a conference on Hold, or when trying to add
another caller, all internal calls are dropped.
Conferencing when talking on a Virtual Extension:
o While talking on a Virtual Extension, if the station has an internal call on Hold, a conference
call cannot be established.
o While talking on a Virtual Extension, if the station receives an intercom call (call to its actual
station number), a conference call cannot be established.
o While talking on a Virtual Extension, if the station has a call on Hold, a conference call cannot
be established.
Default Setting
Enabled
System Availability
Terminals
Multiline and Single Line Terminals
To Next Page
Loading...
