NEC Univerge SV8100 - Page 339

UNIVERGE SV8100 Issue 5.0
Conference, Voice Call/Privacy Release 1 - 329
Guide to Feature Programming
Operation
To join a Voice Call Conference (if invited):
1. After Conference request, press indicated line key.
. A Conf indication is displayed on both telephones.
. A trunk with privacy release or Voice Call Conference blinks.
Program
Number
Program Name Description/Comments Assigned Data
14-01-19 Basic Trunk Data Setup –
Privacy Mode Toggle Option
Determine if a trunk should be
able to be toggled to a private/
non-private line (0 = Disabled,
1 = Enabled). This option is not
required for Voice Call
Conference.
0 = Disable Private
Line (Normal)
1 = Enable Private Line
(Private Line)
(default = 0)
15-07-01 Programmable Function Keys Use to assign functions to multiline
terminal line keys.
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
20-13-09 Class of Service Options
(Supplementary Service) –
Privacy Release
Turn off or on an extension ability
to initiate a Voice Call Conference.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-13-17 Class of Service Options
(Supplementary Service) –
Barge-In Tone/Display (Intrusion
Tone)
In an extension Class of Service,
turn On (1) or Off (0) the Barge-In
(Intrusion) Tone. If disabled, this
also turns off the Barge-In display
at the called extension.
0 = Off
1 = On
(default = 1 for
COS 1~15)
31-01-04 System Options for Internal/
External Paging – Privacy
Release Time
Set the interval users have to join
a Voice Call Conference after it is
announced. (Note that this interval
is also used for Meet Me
Conference.)
0~64800 (seconds)
(default = 90 seconds)