NEC Univerge SV8100 - Page 346

Issue 5.0 UNIVERGE SV8100
1 - 336 Data Line Security
Guide to Feature Programming
Operation
None
Program
Number
Program Name Description/Comments Assigned Data
20-09-05
Class of Service Options
(Incoming Call Service) – Signal/
Voice Call
Turn off or on an extension ability
to enable Handsfree Answerback
or Forced Intercom Ringing for
their incoming Intercom calls.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-09-06
Class of Service Options
(Incoming Call Service) –
Incoming Time Display
If this option is set to 1, the
Incoming Call Time is displayed on
the multiline terminal LCD while
the telephone is ringing.
0 = Off
1 = On
(default = 0 for COS
01~15)
20-09-07
Class of Service Options
(Incoming Call Service) – Call
Queuing
Turn Off (0) or On (1) an extension
ability to have calls queued if a call
rings the extension when it is
busy.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-13-05
Class of Service Options
(Supplementary Service) –
Intercom Off-Hook Signaling
Turns off or on an extension ability
to receive Off-Hook signals.
. 20-09-07 must be set to 0
also for this to be effective.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-13-06
Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
Allows a busy extension ability to
manually (0) or automatically (1)
receive Off-Hook signals.
0 = Off
1 = On
(default = 1 for
COS 1~15)
20-13-35
Class of Service Options
(Supplementary Service) – Block
Camp-On
Use this option to turn On (1) or
Off (0) extension ability to block
callers from dialing
# to camp-on.
0 = Off
1 = On
(default = 0 for
COS 1~15)