Issue 5.0 UNIVERGE SV8100
1 - 366 Department Step Calling
Guide to Feature Programming
Program
Number
Program Name Description/Comments Assigned Data
11-12-07 Service Code Setup (for Service
Access) – Step Call
If required, customize the Step
Call service code to be used by an
extension user.
MLT, SLT
(default = 808)
11-16-01 Single Digit Service Code Setup
– Step Call
If required, use this option to
change the Department Step
Calling Single Digit Service Code.
(default = Not
assigned)
15-07-01 Programmable Function Keys Assign a function key Department
Step Calling (code 36).
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
*00 ~ *99
(Appearance Function
Code) (Service Code
852 by default)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
20-08-12 Class of Service Options
(Outgoing Call Service) –
Department Group Step Calling
Turn off or on an extension ability
to use Department Group Step
Calling.
0 = Off
1 = On
(default = 1 for
COS 1~15)
To Next Page
Loading...
