Issue 5.0 UNIVERGE SV8100
1 - 376 Dialing Number Preview
Guide to Feature Programming
Operation
To use Dial Number Preview to place a call (multiline terminal only):
1. Do not lift the handset or press Speaker.
2. To preview any number, dial the number you wish to call.
. With VRS installed, you must press * to preview the number.
To preview a Speed Dial – System/Group number, press Redial and dial the
Speed Dial – System/Group bin number you want to call.
. The number is displayed.
Program
Number
Program Name Description/Comments Assigned Data
20-06-01
Class of Service for Extensions
Assign a Class of Service (1~15)
to extensions.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
20-08-05
Class of Service Options
(Outgoing Call Service) – Dial
Number Preview (Preset Dial)
Turn off or on an extension ability
to use Dial Number Preview.
0 = Off
1 = On
(default = 1 for
COS 1~15)
To Next Page
Loading...
