EasyManua.ls Logo

NEC Univerge SV8100 - Page 40

NEC Univerge SV8100
1174 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Issue 5.0 UNIVERGE SV8100
1 - 30 Alarm Reports
90-11-02 System Alarm Report – Report
Method
When Alarm Reports are to be
e-mailed, set this option to 1. This
program has higher priority than
Program 90-12-06.
0 = No Report
1 = E-mail Address
(default = 0)
90-11-06 System Alarm Report – SMTP
Host Name
When Alarm Reports are to be
e-mailed, set the SMTP name (for
example, smtp.yourisp.com).
Contact your ISP (Internet Service
Provider) for the correct entry if
needed.
Up to 255 characters
(default not assigned)
90-11-07 System Alarm Report – SMTP
Host Port Number
When Alarm Reports are to be
e-mailed, set the SMTP host port
number. Contact your ISP
(internet service provider) for the
correct entry if needed.
0 ~ 65535
(default = 25)
90-11-08 System Alarm Report – To Email
Address
When Alarm Reports are to be
e-mailed, set this e-mail address
to which the report should be sent.
Up to 255 characters
(default not assigned)
90-11-09 System Alarm Report – Reply
Address
When Alarm Reports are to be
e-mailed, set the e-mail address
where replies should be e-mailed.
Up to 255 characters
(default not assigned)
90-11-10 System Alarm Report – From
Address
When Alarm Reports are to be
e-mailed, set this e-mail address
for the station sending the report.
Up to 255 characters
(default not assigned)
90-11-11 System Alarm Report – DNS
Primary Address
When Alarm Reports are to be
e-mailed, set the DNS primary
address.
0.0.0.0 ~
255.255.255.255
(default = 0.0.0.0)
90-11-12 System Alarm Report – DNS
Secondary Address
When Alarm Reports are to be
e-mailed, set the DNS secondary
address.
0.0.0.0 ~
255.255.255.255
(default = 0.0.0.0)
90-11-13 System Alarm Report –
Customer Name
When Alarm Reports are to be
e-mailed, enter a name to identify
the particular system.
Up to 255 characters
(default not assigned)
90-25-01 System Alarm Report CC Mail
Setup – CC Mail Address
Define the mail address to receive
the system alarm report CC Mail
setup.
Up to 255 characters
(default not assigned)
90-50-01 System Alarm Display Setup -
System Alarm Display Telephone
Define the extension number that
Alalrm reports are displayed on.
Up to eight digits
(default not assigned)
Program
Number
Program Name Description/Comments Assigned Data

Table of Contents

Other manuals for NEC Univerge SV8100

Related product manuals