NEC Univerge SV8100 - Page 430

Issue 5.0 UNIVERGE SV8100
1 - 420 Direct Inward System Access (DISA)
25-07-02 System Timers for VRS/DISA –
VRS/DISA No Answer Time
A DISA caller can ring an
extension for this time before the
system sets the call as a Ring No
Answer. After this time expires,
the call follows the programmed
Ring No Answer routing. (Refer to
Program 25-04 in the SV8100
Programming Manual.
0~64800 (seconds)
(default = 0 seconds)
25-07-03 System Timers for VRS/DISA –
Disconnect after VRS/DISA
retransfer to IRG
Define the system timers which
affect DID and DISA after VRS/
DISA retransfer to IRG.
0~64800 (seconds)
(default = 60 seconds)
25-07-04 System Timers for VRS/DISA –
Calling Time to Automatic
Answering Telephone Set
Set the answering waiting time of
the automatic answering
extension when an incoming DID
trunk call is received.
0~64800 (seconds)
(default = 10 seconds)
25-07-05 System Timers for VRS/DISA –
Duration Time for Guidance
Message by Automatic
Answering Telephone Set
Set the announcement time of the
automatic answering extension
before an incoming DID trunk
caller is disconnected.
0~64800 (seconds)
(default = 10 seconds)
25-07-06 System Timers for VRS/DISA –
Duration Time for Guidance
Message by ACI
Set the announcement time by the
ACI before an incoming DID trunk
caller is disconnected (0~64800
seconds).
0~64800 (seconds)
(default = 10 seconds)
25-07-07 System Timers for VRS/DISA –
Long Conversation Warning
Tone Time
Determine the time a DISA caller
or any automatically transferred
trunk-to-trunk (such as Tandem
Trunking) conversation can talk
before the Long Conversation tone
is heard.
0~64800 (seconds)
(default = 3600
seconds)
25-07-08 System Timers for VRS/DISA –
Long Conversation Disconnect
Time
This time determines how long the
system waits before disconnecting
a a DISA or any automatically
transferred trunk-to-trunk (such as
Tandem Trunking) call after the
Long Conversation tone is heard.
0~64800 (seconds)
(default = 10 seconds)
25-07-09 System Timers for VRS/DISA –
DISA Internal Paging Time
This is the maximum time of an
Internal Page placed by a DISA
caller. If the Page continues
longer than this time, the system
terminates the DISA call.
0~64800 (seconds)
(default = 30 seconds)
25-07-10 System Timers for VRS/DISA –
DISA External Paging Time
This is the maximum time an
External Page is placed by a DISA
caller. If the Page continues longer
than this time, the system
terminates the DISA call.
0~64800 (seconds)
(default = 30 seconds)
Program
Number
Program Name Description/Comments Assigned Data