NEC Univerge SV8100 - Page 435

UNIVERGE SV8100 Issue 5.0
Direct Inward System Access (DISA) 1 - 425
5. Dial an extension.
- OR -
Dial 9 for Trunk Group Routing or ARS.
- OR -
Dial Alternate Trunk Route Access Code (if enabled).
- OR -
Dial 804 + a trunk group number (1~100) for an outside call.
- OR -
Dial 805 + a trunk number (1~200) for an outside call.
- OR -
Dial 803 + System Speed Dialing bin number.
- OR -
Dial 0 for the operator.
- OR -
Dial 801 + an Internal Paging Zone number (0, 1~9, 00, 01~64).
- OR -
Dial 803 + an External Paging Zone number (1~8 or 0 for All Call).
- OR -
Dial 810 + a busy extension number to barge in to a call.
To forward extension calls using a DISA call into the system:
1. Dial the telephone number that rings the DISA trunk.
2. Wait for the DISA trunk to automatically answer with a unique dial tone.
3. Dial the 6-digit DISA password (access code).
4. Wait for a second unique dial tone.
5. Dial the Call Forward service code (as defined in Program 11-11-01 through Program 11-11-05).
6. Dial the number of the extension to be forwarded.
7. Dial 1 to set Call Forwarding or 0 to cancel Call Forwarding.
8. Dial the extension number to which the calls will be forwarded.