Issue 5.0 UNIVERGE SV8100
1 - 34 Alphanumeric Display
Guide to Feature Programming
Operation
Operation is automatic if enabled in programming.
Program
Number
Program Name Description/Comments Assigned Data
11-11-13 Service Code Setup (for Setup/
Entry Operation) – Display
Language Selection for Multiline
Terminal
If needed, redefine the service
code used to select the language
for display multiline terminals.
MLT
(default = 778)
15-02-01 Multiline Telephone Basic Data
Setup – Display Language
Selection
(To select options 8~10, press
either 8 or Recall, then press line
keys 1~3. Key 1 is option 8, Key 2
is option 9, and Key 3 is option 10.)
Select the language to be
displayed on a multiline terminal
display.
0 = Japanese
1 = English
2 = German
3 = French
4 = Italian
5 = Spanish
6 = Dutch
7 = Portuguese
8 = Norwegian
9 = Danish
10 = Swedish
11 = Turkish
12 = Latin American
Spanish
13 = Romanian
14 = Polish
(default = 1)
20-06-01 Class of Service for Extensions Assign a Class of Service (1~15)
to an extension.
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
20-11-08 Class of Service Options (Hold/
Transfer Service) – Transfer
Information Display
For Class of Service in an
extension, turn Off or On an
incoming transfer preanswer
display for an extension.
0 = Off
1 = On
(default = 1 for COS
01~15)
To Next Page
Loading...
